The horn antennas of the FT-RF horn double ridged antenna series are characterized by an enormous broad frequency range from 2GHz to 18GHz and very high input powers reach to 300W. The gain increases with increasing frequency up to max 17 dBi. The products are in stock and can be shipped It is suitable for both transmitting and receiving purposes, especially suitable for microwave and EMC measurements. This antenna has a more uniform gain and antenna factor because of the better behavior of its radiation pattern.
For EMC/ EMC testing:
Pre-compliance testing lowers the chances of certification failure. You can make adjustments throughout the design phase with pre-compliance testing. Fixing issues after compliance testing are far more costly and time-consuming than fixing them at the design stage. Pre-compliance testing might concentrate on the areas where you are concerned about potential issues. Instead of looking for faults, pre-compliance testing focuses on identifying solutions.
700MHz to 8GHz Double Ridged Broadband Waveguide Horn Antenna version 2 Model No: HA-07M08GA2-NF
Frequency: 700MHz to 8GHz Gain: 6 dbi to 17 dBi LxWxH: 661x430x445mm N.W.: 8.1kg -3dB Beamwidth: Horz.26 Deg Vert.34 Deg
Double Ridged Horn Antenna Sort by:Select The horn antenna is a broadband passive device, shaped like a pyramid horn, referred to as a TEM antenna, which guides the beam of radio waves at a precise frequency. FT-RF Double Ridged Horn antennas have frequency capabilities ranging from 400MHz to 40GHz depending on type and style. These series are characterized by a huge frequency range and extremely high input powers. With increasing frequency, the gain rises to a maximum of 18 dBi. At higher frequencies, the increased gain compensates for the increasing cable losses.
The advantages of Horn antenna:
- Wide bandwidth: Because the horn antenna has no resonant parts, it can function over a wide range of frequencies.
- Easy waveguide interface: These antennas are very easy to interface to waveguide due to their shape, but they can also be designed with a transition so that a regular coaxial feeder can be used.
- Easy to make, simple design.
The horn is suitable for both transmitting and receiving purposes, especially suitable for EMC and immunity test measurements.
Recommended Accessories
- Antenna Tripod: easy and fast-changing polarisation. 100% stable handling
没有评论:
发表评论